Ever wonder why sometimes you dont receive enough vapor with your electronic cig & want to know if theres something you can do about it. If you Just keep adding fluid that won’t fix the issue. Its the problem itself.

One way you can get rid of the extra fluid from the electric cigarette atomizer is to grab something thats good at absorbing water. This stuff works well, it’s an old brown shopping bag paper, they also call it craft paper, also a newspaper works fine & paper towels to as well, anything that can be torn into a tiny piece. Then you may want to roll it up into a small tube. What you want is a tube that is just big enough to fit in the end of the e cigarette atomizer. You don’t want to push it in too much to break your e cigarette atomizer. Now you can vape normally. You can tip your vapor cigarette up (the LED light facing upwards) in order to let the E juice to flow down. Once you take enough vapes it will eventually taste dry or like metal.

Then you take out the brown piece of paper that we used (or any paper towel or any absorbent liquid item). Now it should be nice and dry in there. Get the E liquid bottle and use the E liquid to drip carefully and slowly along the outside of the wall inside of the cartridge to avoid the center hole. so just drip it along the side of the wall, be sure to rotate along the outside of the cartomizer wall in order to make sure every bit of the stuffing is moist. Once the E liquid start to “pool” itself at the top, then thats when you’ll know its full. Go ahead and take your rubber stopper and put it back in. This will stop and compact the pooling of E liquid at the top and then place it back on your battery, then you’re ready to smoke it. It’s that simple.